i1Pro 2

The X-Rite i1Pro 2 Probe is a Spectroradiometer that is a good addition to any colour critical environment, and in combination with ColourSpace enables accurate calibration to be achieved for both projection as well as monitors via contact and non-contact use.

  • ColourSpace Integration
  • 10 nm Optical resolution
  • 0.2 to 1200 cd/m2
  • Wavelength Calibration Technology
  • Temperature Drift Compensation
  • Solid Construction
i1Pro 2 + Shipping Ex. VAT (Shipping included)


Light Illusion provides a 'Display Only OEM' version of the i1Pro 2, including i1Pro 2 Spectroradiometer, Calibration Plate, USB Cable, Carrying Case, Tripod Holder, Ambient Light Measurement Head, Display Holder, Quick Start Guide.

The i1Pro 2 includes dark current measurement on sensor to reduce temperature drift and noise, and the protective lens glass can be removed for cleaning.

Built-in wavelength calibration technology performs a self-check of the position of the i1Pro 2's optical grating in respect to the sensor during the white calibration. Damaged instruments can be identified for required repair, while smaller shifts can be corrected automatically.

Note: the i1Pro 2 is extremely power hungry.
Never use the probe with a USB extension, and for the best results use a powered USB hub.


  • Contact and non-contact operation
  • Holographic diffraction grating with 128-pixel diode array
  • Spectral Range: 380 - 730 nm
  • Physical sampling interval: 3.5 nm
  • Optical resolution: 10 nm
  • Spectral reporting: 380 ... 730 nm in 10 nm steps
  • Measurement aperture: 4.5 mm
  • Measurement range: 0.2 - 1200 cd/m2
  • Short-term repeatability: x,y: +/- 0.002 typical (5000°K, 80 cd/m2)
  • Temperature: 10°C - 35°C
  • Humidity: 0% - 80% non-condensing

Note: measurement performance data is based on X-Rite's manufacturing standards, equipment, and conditions, and is not guaranteed outside of X-Rite's own environment.

As with all probes, i1Pro 2 operation and function is controlled via the Probe Options menu, accessed via the Profiling window.

The i1Pro 2 has no variables that are directly associated with the probe, other than Probe Calibration, plus generic probe settings such as Extra Delay Time, Probe Matching, Probe Offset, etc.

X-Rite i1Pro 2

Calibration Settings

Calibration Settings provides generic probe settings, as well as the Probe Calibration option.

Average Low Light

Average Low Light is a probe generic option, that averages multiple readings in low-light situations using an advanced algorithm built into ColourSpace. The algorithm varies based on the probe in use to provide the best possible results.

Probe Calibration

The Probe Calibration button will save a calibration reading, made with the i1Pro 2 placed on its matched calibration plate.
Make sure the serial number on the calibration plate matches the i1pro 2 serial number.

Extra Delay Time

Extra Delay sets a time after the patch has been changed before probe measurement starts.
This can deal with delays in the image pipeline.

Probe Matching

Probe Matching is really unnecessary with the i1Pro 2, as it is a Spectroradiometer.
The options is provided on a Why Not basis...

Probe Offset

Probe Offset enables a user to manually enter offset values for different probes/display combinations.
Perceptual Colour Match is a preferable approach.

Additional Info.

Probe Matching