| Forums | Register | Polls | Search | Statistics |
 (?)  
You must be logged in to post content on this forum.
Tips and Tricks Light Illusion Forums / Tips and Tricks /  
 

Full Screen Stabilisation patches

 
Author Steve

INF
Male
#1 | Posted: 18 Mar 2021 19:22 
A reminder that with the latest ColourSpace release there is now a FW tick box.
It will set Stabilisation patches to be Full Screen (FW = Full Width), regardless what the patch generator patch size is set to.

This will help eliminate potential image burn-in issues with displays such as (W)OLEDs.

Obviously, the patch colour needs to be set to a value greater than zero (black) for the Full Screen setting to have any impact.

Steve
Steve Shaw
Mob Boss at Light Illusion

Author Steve

INF
Male
#2 | Posted: 26 Mar 2021 12:21 
A comment on the FW Stabilisation feature:

When using FW Stabilisation mode, with smaller profiling patch sizes, the real calibration patches may momentarily flash the Stabilisation colour when changing from the FW Stabilisation patch, to the smaller profiling patch. This is due to communication speed of the TPG in use, as the patch size command is sent first, followed by the patch colour command. The probe read doesn't start until the patch colour command has been sent, so any colour flash cannot affect the profile measurements.

Steve
Steve Shaw
Mob Boss at Light Illusion

You must be logged in to post content on this forum.
Tips and Tricks Light Illusion Forums / Tips and Tricks /
 Full Screen Stabilisation patches

 

 
Online now: Guests - 1
Members - 0
Max. ever online: 192 [11 Jan 2023 08:39]
Guests - 192 / Members - 0