As Ted says, no reset is needed IF you have previously installed v.2968, or later.
The download email now states that too.

Steve

Hi, Ted. I'm also updating from 10.0.0.2969, which I did need a reset for. I haven't installed the new 10.0.0.2970 yet. I was just going by a statement in the download link email I received that a license reset would be required. Normally this is prefaced by something saying a reset would be needed if updating from 9.0, but not this time. Steve has already responded to my license reset request since my last post, saying that a reset wouldn't be necessary. It was just a little concerning. Thanks!

LightSpace CMS 10.0.0.2972 (06 August 2019) has been released.

Release Notes

Corrected application of Drift with Hybrid mode.

Changed default HGL Surround Luminance to 5 nits.

Corrected profile data shown on Grey Only profiles with invalid black level readings.

Download Link: https://www.lightillusion.com/downloads.html

LightSpace CMS 10.0.0.2977 (23 August 2019) has been released.

Release Notes

Updated Murideo SIX-G integration.

Updated madVR integration to add HDR features.

Updated madVR dll with improved LUT interpolation.
(This is a madVR change, not a change to LightSpace)

Download Link: https://www.lightillusion.com/downloads.html

LightSpace CMS 10.0.0.2981 (05 September 2019) Beta is available.

Release Notes

Added support for X-Rite i1PRO3 Plus spectrophotometer.

Added option to Lumagen processors to upload 1D LUT separately from 3D LUT.



The should improve the attainable greyscale.

As the 1D LUT is positioned after the 3D LUT in the video processing pipeline of Lumagen, you must profile and upload the 1D LUT first, and then re-profile with the 1D active, and upload the 3D.

The 1D+3D option works as before.

Download

As is usual, for that beta download link, please contact me here only: http://www.displaycalibrations.com/contact_us.html

LightSpace CMS 10.0.0.2983 (10 September 2019) has been released.

Release Notes

Added support for X-Rite i1PRO3 Plus spectrophotometer.

Updated madVR integration to add HDR features.

Updated Lumagen integration with separate 1D and/or 3D LUT support

Added option to Lumagen processors to upload 1D LUT separately from 3D LUT.

This should improve the attainable greyscale.

As the 1D LUT is positioned after the 3D LUT in the video processing pipeline of Lumagen, you must profile and upload the 1D LUT first, and then re-profile with the 1D active, and upload the 3D.

The 1D+3D option works as before.

Download Link: https://www.lightillusion.com/downloads.html

LightSpace CMS 10.0.0.2987 (03 October 2019) has been released.

Release Notes

Added multi-point Volumetric Probe Matching capability.

Reduced System Gamma min. for HLG, for emulation on low luma displays.

Changed madVR HDR DCI-P3 white point to D65.

Release Notes

This new and unique probe matching capability is aimed for displays with non-additive color response, such as WRGB OLED's, where the addition of the white pixel breaks the expected additive operation of the display.

The on-line guide has been updated: https://www.lightillusion.com/probe_use.html

Download Link: https://www.lightillusion.com/downloads.html

LightSpace CMS 10.0.0.2988 (05 October 2019) has been released.

Release Notes

Fixed 'save probe settings' bug introduced in 10.0.2987.

Download Link: https://www.lightillusion.com/downloads.html

LightSpace CMS 10.0.0.2989 (07 October 2019) has been released.

Release Notes

Added checks to Volumetric Probe Matching for invalid measurement data.

Download Link: https://www.lightillusion.com/downloads.html

The 'Volumetric Probe Matching ' info has been updated to the various LightSpace website pages.

For Volumetric Probe Matching a profile will need to be cube based, or valid Quick Profile such as Primary Only, or Edge. (Volumetric Probe Matching will always work best with uniform profiles, not random ones)

Best results will be attained when the display peak white is set to be close to the target peak white. (Say, 100 nits for SDR calibration)

The Black Level of the display should also be raised to a level that both probes can read black consistently, without error. (Most probes can read around 1 nit accurately)

Profile the display with each probe in-turn as normal, with 'None' selected within the 'Active Probe/Display Data' options. (You should use a None/Bypass/Default pre-set within the Tristimulus, not a display specific matrix pre-set)

The profiles can be 'Characterisation' cube based profiles, or 'Quick Profiles'.

After profiling both probes, open the 'Manage Colour Space' library, and use 'Generate BPD' to convert the profiles into Probe Matching files.

The probe matching files can now be selected within the 'Active Probe/Display Data' drop-down menus within 'Options', exactly as for 4 colour matrix probe matching.

LightSpace CMS 10.0.0.2996 (17 October 2019) has been released.

Release Notes

Added support for Postium displays with 3D LUT capability.

Fixed bug with Probe Matching followed by Luminance Min/Max measurement.

Added additional HDR slot Upload options to Kroma displays.

Download Link: https://www.lightillusion.com/downloads.html

LightSpace CMS 10.0.0.2999 (31 October 2019) has been released.

Release Notes

Added Export capability for Sub-Space processed CSV patch lists.

Fixed occasional Gamut Mapping bug in Convert Colour Space.

Re-fixed bug with Probe Matching followed by Luminance Min/Max measurement.

Fixed Lumagen Pro Options Menu bug.

Download Link: https://www.lightillusion.com/downloads.html

LightSpace CMS 10.0.0.3001 (08 November 2019) has been released.

Release Notes

Increased max LUM range in Probe Matching.

Download Link: https://www.lightillusion.com/downloads.html

LightSpace CMS 10.0.0.3015 (16 January 2020) has been released.

Release Notes

Added integration for ASUS PA32UCX display calibration.

Added Brightness and PWM controls for BenQ displays.

Corrected error with Sub Space, with Target Space Code Values, and Drift patches.

Download Link: https://www.lightillusion.com/downloads.html

LightSpace CMS 10.0.0.3019 (18 March 2020) has been released.

Release Notes

Added change for BenQ Brightness setting issues (PV270 only).

Updated Eizo API library.

Updated ASUS SDK for final display firmware release.

Download Link: https://www.lightillusion.com/downloads.html