Hi all,
at Steve (i'm not allowed to use the at-sign)
i do not use audio over hdmi, i turned it off. But even changing passback didn't help
at Harry
I put a 3m cable between the lumagen and the eecolor. It didn't work.
at JJ, Harry
my chain looks like that: blu-ray -> AV Reciever ->lumagen -> eecolor -> darblet For the testing purposes i removed the darbee from the chain.
First i always got this hdcp error. Strange thing is, the reciever didn't have an error, the error happend only between the lumagen and the eecolor
I turned off the blu-ray Player -> didn't help, the lumangen complained. I turned off the reciever -> didn't help, the lumagen complained. (with long and short cables, didn't matter).
Then i was quite frustrated and turned off the lumagen, turned it back on and: the picture was there?! What the heck happend there?
so i shut down all devices and turned them back on -> the same error again. Turned off the lumagen and turned it back on -> it works!
So whatever happens there, at least, thanks to you two, i found a workaround. Turning off /on the lumagen again does the trick. But sometimes only for a short time (2 sec), then the error again, sometimes the picture stays. that's quite frustrating. So i'm forced remove the lumagen from the chain.
I asked the lumagen people about the problem and they made it quite easy for themselves: I should remove the eecolor from the chain, it has a crappy hdcp implementation. I should use the lumagen instead, the quality would be the same, they said. Thanks. That helps.
So my temporary, very unsatisfying solution is to remove the lumagen from the chain. then everything is ok. No Problems, but no pattern generator also.
If someone might have another idea how to come by this problem i would very much appreciate it.
Maybe other people will have the same problem and find a solution.
Anyways, Thank you very much for narrowing this thing down.
Mathias |