| Forums | Register | Polls | Search | Statistics |
 (?)  
You must be logged in to post content on this forum.
Display Calibration Light Illusion Forums / Display Calibration /  
 

Request for a new feature

 
Author alex_t
ZRO
#1 | Posted: 24 Dec 2013 10:52 
Hello Steve.

Could you add the following feature (I guess it should be very simple):

When a 3D characterisation starts (before the 30s count), it would be handy to have a window which recalls some useful information such as:

- number of point for 3DCUBE used
- LSCMS integration mode used : close loop mode or DIP mode
- settings used for the active probe
- presets used for the active probe

With a OK and CANCEL button.

What is your opinion ?

Thanks and have a merry Xmas

alex

Author Steve

INF
Male
#2 | Posted: 24 Dec 2013 11:23 
We'll have a look

We have a we new tools being developed at the moment, so I can't guarantee anything, but as you say, it should be easy!
Steve Shaw
Mob Boss at Light Illusion

Author alex_t
ZRO
#3 | Posted: 24 Dec 2013 12:14 
Thanks Steve

Author alex_t
ZRO
#4 | Posted: 26 Dec 2013 11:51 
Hi Steve.

I have another request : could you add the possibility to resize the calibration area window in full screen with one or two clicks ? For example : a right click on the window by selecting "FULL SCREEN" would be great. (plus "NORMAL" to get back to the size before the full screen)

In fact, when I check my video projector with the internal pattern generator of LSCMS (without the Radiance in the loop), I use the HDMI out of my laptop and the extended desktop. So I need to put the calibration area window in the secondary display (which corresponds to the video projector) and I have to resize it manually. It's not handy.

Thanks

Alexandre

Author Steve

INF
Male
#5 | Posted: 26 Dec 2013 11:55 
Can't promise that one quickly Alex, as it's not something we have ever been asked for before...
Most users prefer non-full screen patches.

But, it's not impossible so I will add it to the list
Steve Shaw
Mob Boss at Light Illusion

Author alex_t
ZRO
#6 | Posted: 26 Dec 2013 12:05 
Steve:
Most users prefer non-full screen patches.

Thanks Steve

May be am I wrong by using full screen patches with my video projector ? What is your opinion ? What would be the good size (the default size ?) ?

Author Steve

INF
Male
#7 | Posted: 26 Dec 2013 15:00 
So long as the patch covers the area being read by the probe, that's all that matters
Steve Shaw
Mob Boss at Light Illusion

You must be logged in to post content on this forum.
Display Calibration Light Illusion Forums / Display Calibration /
 Request for a new feature

 

 
Online now: Guests - 1
Members - 0
Max. ever online: 192 [11 Jan 2023 08:39]
Guests - 192 / Members - 0