Working with Flanders Scientific and X-Rite we have a new EDR for the i1D3 specifically for the WRGB OLED screen (LG WOLED).
The spectral data used for this EDR has been generated from the FSI XM55U/XM65U display.
The EDR needs additional testing, as the WOLED screen is not additive - white is not equal to the sum of the R, G, and B components, due to the additional White pixel, as can be seen in this RGB Separation graph.
This also means that any volumetric colour (any colour at all) is not a simple sum of the R, G and B components, but can be mixed with some variable amount of white as well...
And there are obviously three sensors to be calibrated in the i1D3, but four display colourant channels within the display, which makes any direct probe measurement based calibration essentially unmatched.
This means we may need to add additional spectral data to the EDR to improve its overall response, but for starters this is what we have.
The new i1d3 Support Files for use with LightSpace can be downloaded here:
(www.lightillusion.com/beta/i1d3 Support Files.zip)
Replace the existing i1d3 Support Files folder within the LightSpace installation with the new folder.
The new EDR will show as WRGB OLED within the LightSpace i1D3 preset drop-down menu.
Mob Boss at Light Illusion