Light Illusion is renowned for the level of support it provides to all its customers, and strives to provide an unmatched level of assistance.

These forums are provided to enable open discussions on all aspects of the Film and TV industry.

 | Forums | Register | Reply | Search | Statistics |
Display Calibration Light Illusion Forums / Display Calibration /

LightSpace Connect - Android and iOS App

Author Steve
#1 | Posted: 10 Jan 2017 09:04 | Edited by: Steve 
Just a bit of advance news for our LightSpace CMS users.

We're presently playing with an Alpha version of a new Android/iOS patch generator App for LightSpace.
At the moment we have just the Android version under test (mainly 'cos I don't like Apple stuff, so will have to locate some for testing...), but initial tests look good.

The App should run on Android and Apple mobile phones, Firestick, Chromecast, AppleTV, etc.
(Probably some restrictions depending on the device used, but that's yet to be proven.)

Testing at the moment has been on a Samsung Galaxy S5, both profiling the phone screen, as well as profiling a TV via Screen Mirroring and MHL HDMI cable.

Not yet sure on a release date, as more testing is required... but should not be too far away!


Edit: The app in Android and iOS can be downloaded directly form the relevant 'stores'.

Author Rob Loney
#2 | Posted: 8 Jan 2019 22:17 
Does the app run on a firestick 4k? If so, how do I get the app? I need to bypass my Samsung tablet...not use it as it modifies the video in screen mirror mode.

Will firestick 4k work as a pat gen for LS CMS?

Author Steve
#3 | Posted: 8 Jan 2019 23:34 
The app is resolution independent...
So it should work.
Having said that, never tried, so I would suggest downloading the App and giving it a try.

It should just be on the Amazon store?
Or, you should be able to side-load it.

Well look into any specific issues, if there are any.


Author Vishwa
#4 | Posted: 16 Apr 2019 18:16 
Just a note if it helps anyone new to this. I have the full version of LightSpace Connect and I have it loaded on a 1080p FireTV(the full version square not the stick) and a FireTV 4K(again the square version and not the stick). Ted advised me that they are bit accurate and for the FireTV 4K, the setting should be RGB and in Lightspace options patch scale should be 0-255.
Now I am using the PGenerator more, thanks to Riccardo Biasi's help. I use it with Bluetooth connection.
The Lightspace connect worked well in both FireTV devices. I didn't try the Android version.

Author Vishwa
#5 | Posted: 2 May 2019 18:26 
I just have an observation regarding LightSpace Connect app. Two days ago I was prompted that there is an update and I updated it on the FireTV(the full square version, not the stick). Yesterday I thought I try it and was running a 10pt cube. After about 15 minutes, the patterns were changing in the Laptop but had frozen on the TV connected to the FireTV.
At this point I just stopped the profile and hit the back button on the FireTV remote and it asked if I wanted to disconnect LightSapce Connect. So, the connection was intact but the app had frozen. Just thought I put it out here. I do have a FireTV 4K(not the stick, but the earlier square version). Will try that and see.

Display Calibration Light Illusion Forums / Display Calibration / LightSpace Connect - Android and iOS App Top
Your Reply Click this icon to move up to the quoted message

Only registered users are allowed to post here. Please, enter your username/password details upon posting a message, or register first.
Online now: Guests - 1
Members - 0
Most users ever online: 316 [5 Feb 2020 22:54]
Guests - 316 / Members - 0
© Light Illusion - All rights reserved - Privacy Notice