Light Illusion is renowned for the level of support it provides to all its customers, and strives to provide an unmatched level of assistance.

These forums are provided to enable open discussions on all aspects of the Film and TV industry.

 | Forums | Register | Reply | Search | Statistics |
PGenerator & DeviceControl Light Illusion Forums / PGenerator & DeviceControl /

Raspberry Pi 3 Typ B+

Author vonswiss
#1 | Posted: 14 Dec 2019 10:47 
I have a Raspberry Pi 3 Type B+ as PGenerator.
This is displayed in Lightspace with IP in the Network Manager.
Connected to the JVC with HDMI there are no test images.
The input displayed is 1080p/60.
What do I do wrong. Maybe someone can help me?

Author ConnecTED
#2 | Posted: 14 Dec 2019 10:55 

If you select to run a Quick Profile of Gray Only, do you have patches displayed to your projector?

Better to use 1080p24 patch generation as some display/projectors can provide different results with 24p vs 60p input signal. As the movie content is 24p, no need to use 60p patch generation.

It's been explained there:

Author vonswiss
#3 | Posted: 15 Dec 2019 08:32 

No test images are displayed.
But I think it should also work with 1080/60.
I will try to set the PGenerator to 24hz.
Can I do that with Putty?

Author vonswiss
#4 | Posted: 15 Dec 2019 14:03 
Now I tried it with Putty and the command "hdmi_mode=32".
But the setting remains at 1080/60.
How can I change the screen resolution?

Author ConnecTED
#5 | Posted: 16 Dec 2019 00:41 
You will use Device Control Interface to change PGenerator settings.

Author vonswiss
#6 | Posted: 16 Dec 2019 06:31 
Which Device Control Interface do you mean.
The one from the JVC projector or the Raspberry.
Thank you

Author ConnecTED
#7 | Posted: 16 Dec 2019 09:07 
You can download/install DeviceControl Interface and see some instructions there:

Then from a web-browser, you create a new device with your PGenerator, use translation of this page: attern-generator-by-biasi

Then you can change the PGenerator device settings from your browser.

Author vonswiss
#8 | Posted: 16 Dec 2019 09:17 
Thanks for the support.
I will try it out.

Author vonswiss
#9 | Posted: 16 Dec 2019 18:18 
I installed the device tool.
Could also switch to 1080/24.
Still don't have any test images.

Author ConnecTED
#10 | Posted: 16 Dec 2019 19:58 

PGenerator & DeviceControl Light Illusion Forums / PGenerator & DeviceControl / Raspberry Pi 3 Typ B+ Top
Your Reply Click this icon to move up to the quoted message

Only registered users are allowed to post here. Please, enter your username/password details upon posting a message, or register first.
Online now: Guests - 5
Members - 0
Most users ever online: 167 [12 Dec 2019 19:34]
Guests - 167 / Members - 0
© Light Illusion - All rights reserved - Privacy Notice