| Forums | Register | Polls | Search | Statistics |
 (?)  
You must be logged in to post content on this forum.
PGenerator & DeviceControl Light Illusion Forums / PGenerator & DeviceControl /  
 

PGenerator – Connectivity Guide Wi-Fi & Bluetooth

 
 
Page  Page 4 of 4:  « Previous  1  2  3  4

Author Steve

INF
Male
#46 | Posted: 1 Jan 2020 20:23 
Any point with a negative value will be ignored when making a LUT...

Steve
Steve Shaw
Mob Boss at Light Illusion

Author Make73
ZRO
#47 | Posted: 1 Jan 2020 20:30 
Steve:
Any point with a negative value will be ignored when making a LUT...

Steve

Okay, but I can´t do new .bcs file without those bad readings, except maby open it with notepad and totally remove those three readings.
That was which confused me.

But if that´s the case, no need to make new 9261p profiling

Author Steve

INF
Male
#48 | Posted: 1 Jan 2020 20:42 
With a -ve added to the bad points they will not be used when making a LUT.
So no need for a profile 'without' the points.

Steve
Steve Shaw
Mob Boss at Light Illusion

Author Make73
ZRO
#49 | Posted: 1 Jan 2020 20:45 
Steve:
With a -ve added to the bad points they will not be used when making a LUT.
So no need for a profile 'without' the points.

Steve

Understood

But I wanted profile without those 3 bad and it seems easy to make one

I didn´t waste over 4 hours, I´m happy.

This software is just superb, I´m glad Ted put me bought it

Author LegendOfFalcon
ZRO
#50 | Posted: 12 May 2020 03:24 
I have found that Malwarebytes can also block LightSpace from detecting PGenerator on the network (both when using PGenerator connected to a router via Ethernet and when using the Bluetooth connection). Closing Malwarebytes + allowing LightSpace through Windows Firewall is what I had to do for my setup to get everything working. Thought I'd pass that info along.

Author RollsRoyce
ZRO
#51 | Posted: 12 May 2020 15:42 
I don't use Windows Firewall at all as I'm behind a hardware firewall on our home network, but I do use Malwarebytes and haven't yet seen that problem with PGenerator on WiFi.

Author LegendOfFalcon
ZRO
#52 | Posted: 12 May 2020 17:51 
Are you using Malwarebytes free or the premium version? I still have an old lifetime premium license from before they switched to an annual subscription.

I went back and did some more testing, LightSpace can't see any available clients when the Malwarebytes Real-Time "Web Protection" feature is turned on. Instead of fully quitting out, I tried just turning that feature off and immediately after LightSpace will detect the PGenerator. I believe the real-time stuff is only in the premium version.

Author RollsRoyce
ZRO
#53 | Posted: 12 May 2020 22:08 
Premium. I did have to allow Device Control access through the McAfee firewall, but the RPi itself was recognized as being on my home network and works fine. Strange that we're having different experiences with Malwarebytes.

Author AmusedToD
ZRO
#54 | Posted: 19 May 2020 23:41 
Hi everyone, new user of LS here. Just starting to learn how everything works in the LS universe (with a big help from Ted along the way).

Anyway, I am experiencing a synchronization problem between LS and PG, which leads to huge reading errors by my meter (i1d3 Retail from 2016).

The errors can be reduced by changing the stabilisation numbers in the probe options (from 0.350 to 0.00), because they usually happen when a black stabilisation patch is displayed. The probe somehow picks up the black patch and that leads to big errors (over 30 dE).

I tried both the BT and direct LAN connection, but the issue persists. I have also created a Firewall rule for LS (inbound and outbound), but it makes no difference. My PG is updated to the latest software version.

Any ideas how to solve this problem?

Author Steve

INF
Male
#55 | Posted: 20 May 2020 07:36 
Please use Extra Delay, as per the User Guides.
https://www.lightillusion.com/colourspace_manual.html#probe-options
and
https://www.lightillusion.com/calibration_issues.html#signal_delay

Steve
Steve Shaw
Mob Boss at Light Illusion

Author Narkose

ZRO
Male
#56 | Posted: 27 Apr 2023 11:34 
Hey @ll

I have now bought Calman home for samsung as ColourSpace ZRO is getting on my last nerve. Whether I think I found out something this morning for the HDR 20 points calibrate, and then I had to work. But more on that in another thread perhaps. I just can't get a ColourSpace connection to PGenerator on a raspberry pi 400. The only thing that works is with a 1.5m USB C cable directly to the PC USB. But over router or wifi it is absolutely not possible. Wifi is not a choice for me either way.

I can ping the raspberry pi when it is only connected in lan with putty without packet loss.

I can connect the raspberry pi with PGenerator and Calman without any problem ONLY ColourSpace can't get it to connect.

I have disabled the router and windows firewall for testing and also added ColourSpace to the windows firewall but still no connection is possible. When I click on connect it immediately turns green and it says Available in the bar, that's it. I attach pictures.

This can ONLY be caused by ColourSpace. What else could you try? About USB C directly to the PC is s*** because only a 1.5m cable goes everything that is over 1.5m delivers too little power. I had once borrowed a USB hub and connected what has grilled my Raspberry pi. And I was lucky to exchange it.

So bomb everything you know into this thread as it seems I'm not the only one with the problem.

ColourSpace and PGenerator developers don't take my post personally if it doesn't click nicely. Sometimes you can use the nicest words and the translation makes it unkind to me after reading in English.

With love and best regards

Only network server
Only network server
PGen Lan CP Auto
PGen Lan CP Auto
PGen lan CP Custom
PGen lan CP Custom
PGen Lan CP off
PGen Lan CP off
PGen NET
PGen NET
Samsung GQ65QB95B, Denon AVR-X 3400H, ColourSpace ZRO+PGenerator 1.5 auf Raspberry Pi® 400, HDMI-Glasfaserkabel Playstation 5, XBOX Series X.

HIFI calibrated with laser rangefinder, decibel meter and Audyssey Multi EQ Editor. Unfortunately, I have to use a translation tool, [color=red]so sorry if something cannot be understood correctly[/color].

Author ConnecTED
LTE
#57 | Posted: 27 Apr 2023 14:06 
Narkose

We don't recommend any user use the WiFi module, as it will affect the device operation, it's a Pi problem, and it can't be fixed.

It's the reason the WiFi module has been disabled by default with Ted's PGenerator ISO.

Disable your WiFi module.

Have you tried the direct LAN connection?

Have you checked the BT connection?

You can find a lot of details about the connectivity options if you look at the first posts here:

https://www.avsforum.com/threads/dedicated-raspberry-pi-pgenerator-thread-set-up-configuration-updates-special-features-general-usage-tips.3167475/post-60090101

If you have any problem with ZRO or Ted's PGenerator, contact here:

https://displaycalibrations.com/contact_us.html

Page  Page 4 of 4:  « Previous  1  2  3  4 
You must be logged in to post content on this forum.
PGenerator & DeviceControl Light Illusion Forums / PGenerator & DeviceControl /
 PGenerator – Connectivity Guide Wi-Fi & Bluetooth

 

 
 
Online now: Guests - 2
Members - 0
Max. ever online: 192 [11 Jan 2023 08:39]
Guests - 192 / Members - 0